Extension Pole Piece | 32mm

The 500mm Transducer Pole Extension is designed to increase the height of your existing 32mm transducer pole, making it easier to operate and control your sonar system while on the water. This extension piece is ideal for anglers using advanced fish-finding technology such as Garmin LiveScope and Lowrance ActiveTarget, allowing better ergonomics and improved visibility when scanning.

Manufactured for durability in harsh marine environments, this extension piece fits directly to the top of your current transducer pole and is designed to be used with the bolt-on handle supplied with your existing pole. The extension can be quickly installed or removed, making it a practical non-permanent height upgrade that is easy to store when not in use.

Available in black powder coated aluminium or lightweight carbon fibre, anglers can choose the finish that best suits their setup.

Features

• 500mm extension piece designed for 32mm transducer poles

• Raises pole height for more comfortable operation and improved sonar control

• Compatible with Garmin LiveScope, Lowrance ActiveTarget and other live sonar systems

• Quick to install and remove for easy storage

• Available in plain alloy, black powder coated aluminium, or lightweight carbon fibre

• Designed to be used with bolt-on handles from current transducer pole models

Important Note for Older Models

If you have an older model transducer pole with a welded-on handle, the welded handle will need to be removed and any burrs cleaned up before installation. A bolt-on handle will then need to be purchased separately for use with this extension piece.

Installation Instructions

Attaching the Extension Piece to Your Transducer Pole

1. Ensure the transducer is fitted to the transducer pole.

2. Undo the bottom tensioning knob on the extension piece and set aside.

3. Place the extension piece onto the top of the transducer pole, ensuring the transducer cable runs through the top of the extension piece.

4. Reinstall the bottom tensioning knob and tighten securely (do not overtighten).

This extension piece is designed as a removable height solution, allowing anglers to easily add reach without permanently modifying their transducer pole.

Supplied from TPA

• 500mm Extension Piece ×1

• Acetal Joiner ×1

• Capscrews ×2

⚠️ Handle not supplied. Use the handle supplied with your current transducer pole.