Name: Ultra HD 1600 Transducer Pole (Suits RAM D &amp; E components) **Please note specification change**
SKU: 38097
Availability: InStock

TRANSDUCER POLE, either powder coated or plain alloy.

MOUNTING BLOCK with countersunk screws (to fit D or E size RAM Balls) with ergonomically friendly tensioning knob and COLLAR with tensioning knob. Bolt-on acetal handle

What IS NOT SUPPLIED:

RAM D SIZE COMPONENTS REQUIRED FOR INSTALLATION - found on our shop page:
RAM Round Base with 2.25” D Ball (RAM-D-202U) attaches to Mounting Block
RAM Short Clamp Arm Size 2.25” (RAM-D-201U-C) joiner "D" Size
RAM Round Base with 2.25” D Ball (RAM-D-202U) attaches to gunwhale of boat OR RAM Double U-Bolt Base with 2.25” D Ball (RAM-D-235U) attaches to rail on boat OR Quick Release Bracket, D Size.

RAM E SIZE COMPONENTS REQUIRED FOR INSTALLATION - Found on our shop page:
RAM^® Double Socket Arm (short joiner) - E Size Short Part#: RAM-E-201U-D
RAM^® Large Round Plate with Ball - E Size Part#:RAM-E-202U x2 - Option to attach to boat: Quick Release Bracket E-Size

INSTRUCTIONS

Establish the position of your transducer pole and whether it will be gunwhale or rail mounted. Choose the appropriate RAM components to suit and attach to the boat (rail or gunwhale). You may wish to have more than one mounting point on the boat.
Remove the 3x bolts supplied on the back of the mounting block.
Place the RAM Round Base on the back of the mounting block and line up holes. Attach firmly using the bolts supplied with a size 5 Allen key.
Use a RAM Clamp Arm to join the ball mount on the pole to the ball mount on the boat.
Loosen the Large Tensioning Knob on the Mounting Block and establish the correct height for the pole for your boat and tighten (do not over-tighten).
Use the Locking (height adjusting) Collar to permanently “lock” this position so that it is at the required length every time the pole is deployed.

ATTACHING TRANSDUCER TO POLE

Refer to instructions received with your unit.

Please contact Transducer Poles Australia if you have any issues.

HANDY HINTS

Not every boat is created equal and neither is every angler. Transducer Poles Australia offer anglers the right fit for your fishing requirements and your ideal boat set-up.

Choose the location to mount the transducer pole where you primarily fish and where you have a good view of your sounder screen.
Many anglers choose to fit the pole close to their “work station” which is often towards the bow of the boat. This is ideal in most situations however when the conditions are rough, consider a second mounting position towards the rear of the boat where there is less “up/down” movement. The less movement, the clearer the screen picture.Another position can be near a side console and can be used when operating the combustion motor at low speed when searching for structure and fish.
This transducer pole is not to be used at moderate to high speed and like your trolling/electric motor, the pole should be removed from the water and stowed.

Ultra HD 1600 Transducer Pole (Suits RAM D & E components) Please note specification change

Reviews

Add a review Cancel reply